Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Scale Mini Crawler (Silver) w/2.4GHz Radio

The Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Scale Mini Crawler with 2.4GHz radio is hitting the scene ready for RC adventures. Despite being scaled down to a compact size, this mini crawler is ready for some big adventures. Get bored at work? Crawl this guy across your desk, we wont tell HR. That laundry you forgot to put away is now a mountain for your SCX24 to climb and conquer. Take this car outside, where its water-resistant electronics are safe from the elements, and make your own course from whatever sticks and rocks are in your yard or local park. The possibilities are endless with this mighty mini.  

Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial 1967 Chevrolet C10 performs like a winner and looks like one, too. The realistic body rides on Method MR307 hole wheels and BFGoodrich Krawler T/A KX tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24 1967 Chevrolet C10 comes ready-to-run with radio and electronics included and installed.

 

• Includes radio transmitter and receiver and battery
• Comes with ESC, motor, and Axial AS-1 servo servo already installed
• Features a realistic body design.
• Licensed wheels are modeled after Method MR307 Hole Wheels
• Licensed tires are modeled after BFGoodrich Krawler™ T/A® KX tires
• 3-Link front and 4-link rear suspension provides optimal handling
• Full ball bearings
• Two bright LED lights included and mounted in the front bumper

Approximate Assembly Time: No assembly required 

Ball Bearings: Full set 

Batteries: Dynamite 7.4V 350mAh 30C LiPo 

Body: Axial Jeep JL Hardtop 

Brakes: Integral with ESC 

Charger: USB LiPo Charger 

Chassis: Stamped Steel Chassis Rails 

Completion Level: Ready-To-Run 

Differential: Worm Gear 16T/4T 

Drivetrain: 4WD 

Ground Clearance: 1.06″ (27mm) 

Height: 4.4″ (114.6mm) 

Length: 8.4″ (215mm) 

Motor Size: 180 

Motor Type: Brushed 180 size, 88 turn 

Pinion: 10T 

Radio: Axial AX-4 2.4GHz 2-Channel 

Servos: AS-1 Micro Steering Servo 

Shock Type: Coil-Over, Plastic Body, .9 – 1.3″ (24 – 33.4mm) 

Size/Scale: 1/24 

Speed Control: AE-6 ESC/RX with Reverse 

Spur Gear: 55T 

Suspension: 3 Link Front and 4 Link Rear 

Tire Diameter: 2.0″ (51mm) 

Tire Tread: Nitto Trail Grappler M/T 

Track: Front and Rear, 3.9″ (99.5mm) distance from outer edges of tires measured side-to-side 

Vehicle Type: Desert Crawler 

Water-Resistant: Yes 

Wheel Diameter: 1.0″ (26mm) 

Wheel Type: Plastic KMC Machete, black in color 

Wheel Width: .48″ (12.4mm) 

Wheelbase: 5.2″ (133.2mm) 

Width: 3.9″ (99.5mm)

 

• (1) Axial AX-4 2.4GHz, 3 Channel Radio System
• (1) Axial AS-1 Servo
• (1) Axial AE-6 ESC/Receiver Combo
• (1) USB Charger (DYNC1062)
• (1) Dynamite 88T 030 Brushed Electric Motor
• (1) Dynamite 350mAh 2S LiPo 7.4V Battery Pack (DYNB0012)
• (4) AA Batteries for the Transmitter
• (1) Silver scale body